Retro Eye care Haitian Deep Dark Default

Row Value Expressions

Row Value Expressions that uses the Groovy syntax

Type: GROOVY

Just use ${ expression } or $->{ expression } in the configuration to identify the row expressions. The content of row expressions uses Groovy syntax, and all operations supported by Groovy are supported by row expressions. ${begin..end} denotes the range interval, ${[unit1, unit2, unit_x]} denotes the enumeration value. If there are multiple ${ expression } or $->{ expression } expressions in a row expression, the final result of the whole expression will be a Cartesian combination based on the result of each sub-expression.

Example:

  • <GROOVY>t_order_${1..3} will be converted to t_order_1, t_order_2, t_order_3
  • <GROOVY>${['online', 'offline']}_table${1..3} will be converted to online_table1, online_table2, online_table3, offline_table1, offline_table2, offline_table3

Row Value Expressions that uses a standard list

The LITERAL implementation will not convert any symbols to the expression part, and will directly obtain the output of the standard list from the input of the standard list. This helps address the issue that Groovy expressions are inconvenient to use under GraalVM Native Image.

Type: LITERAL

Example:

  • <LITERAL>t_order_1, t_order_2, t_order_3 will be converted to t_order_1, t_order_2, t_order_3
  • <LITERAL>t_order_${1..3} will be converted to t_order_${1..3}

Row Value Expressions based on fixed interval that uses the Key-Value syntax

The INTERVAL implementation introduces a Key-Value style property syntax to define a set of time ranges of strings via a single line string. This is often used to simplify the definition of actualDataNodes for Sharding feature.

INTERVAL implements the method of defining multiple attributes as Key1=Value1;Key2=Value2, using ; to separate key-value pairs, and = to separate Key values and Value values.

This implementation actively ignores the time zone information of SP, which means that when DL and DU contain time zone information, no time zone conversion will occur due to inconsistent time zones.

This implementation is not sensitive to the order of key-value pairs, and the line expression does not carry the ; sign at the end.

The INTERVAL implementation introduces the following Key values:

  1. P stands for the abbreviation of prefix, which means the prefix of the result list unit, usually representing the prefix format of the real table.
  2. SP stands for the abbreviation of suffix pattern, which means the timestamp format of the suffix of the result list unit. It usually represents the suffix format of the real table and must follow the format of Java DateTimeFormatter. For example: yyyyMMdd, yyyyMM or yyyy etc.
  3. DIA stands for the abbreviation of datetime interval amount, which means the time interval of the result list unit.
  4. DIU stands for the abbreviation of datetime interval unit, which means the shard key time interval unit. It must follow the enumeration value of Java java.time.temporal.ChronoUnit#toString(). For example: Months.
  5. DL stands for the abbreviation of datetime lower, which means the lower bound of time. The format is consistent with the timestamp format defined by SP.
  6. DU stands for the abbreviation of datetime upper, which means the upper bound value of time. The format is consistent with the timestamp format defined by SP.
  7. C stands for the abbreviation of chronology, which means calendar system and must follow the format of Java java.time.chrono.Chronology#getId(). For example: Japanese, Minguo, ThaiBuddhist. There is a default value of ISO.

Whether the Value corresponding to the Key of C is available depends on the system environment in which the JVM is located. This means that if the user needs to set C=Japanese, they may need to call java.util.Locale.setDefault(java.util.Locale.JAPAN); in the application’s startup class to modify the system environment. Discuss two JVM environments.

  1. Hotspot JVM determines the return value of java.util.Locale.getDefault() at RunTime.

  2. GraalVM Native Image determines the return value of java.util.Locale.Locale.getDefault() at BuildTime, which is inconsistent with the performance of Hotspot JVM. Refer to https://github.com/oracle/graal/issues/8022 .

Type: INTERVAL

Example:

  • <INTERVAL>P=t_order_;SP=yyyy_MMdd;DIA=1;DIU=Days;DL=2023_1202;DU=2023_1204 will be converted to t_order_2023_1202, t_order_2023_1203, t_order_2023_1204
  • <INTERVAL>P=t_order_;SP=yyyy_MM;DIA=1;DIU=Months;DL=2023_10;DU=2023_12 will be converted to t_order_2023_10, t_order_2023_11, t_order_2023_12
  • <INTERVAL>P=t_order_;SP=yyyy;DIA=1;DIU=Years;DL=2021;DU=2023 will be converted to t_order_2021, t_order_2022, t_order_2023
  • <INTERVAL>P=t_order_;SP=HH_mm_ss_SSS;DIA=1;DIU=Millis;DL=22_48_52_131;DU=22_48_52_133 will be converted to t_order_22_48_52_131, t_order_22_48_52_132, t_order_22_48_52_133
  • <INTERVAL>P=t_order_;SP=yyyy_MM_dd_HH_mm_ss_SSS;DIA=1;DIU=Days;DL=2023_12_04_22_48_52_131;DU=2023_12_06_22_48_52_131 will be converted to t_order_2023_12_04_22_48_52_131, t_order_2023_12_05_22_48_52_131, t_order_2023_12_06_22_48_52_131
  • <INTERVAL>P=t_order_;SP=MM;DIA=1;DIU=Months;DL=10;DU=12 will be converted to t_order_10, t_order_11, t_order_12
  • <INTERVAL>P=t_order_;SP=GGGGyyyy_MM_dd;DIA=1;DIU=Days;DL=平成0001_12_05;DU=平成0001_12_06;C=Japanese will be converted to t_order_平成0001_12_05, t_order_平成0001_12_06
  • <INTERVAL>P=t_order_;SP=GGGGyyy_MM_dd;DIA=1;DIU=Days;DL=平成001_12_05;DU=平成001_12_06;C=Japanese will be converted to t_order_平成001_12_05, t_order_平成001_12_06
  • <INTERVAL>P=t_order_;SP=GGGGy_MM_dd;DIA=1;DIU=Days;DL=平成1_12_05;DU=平成1_12_06;C=Japanese will be converted to t_order_平成1_12_05, t_order_平成1_12_06

Row Value Expressions that uses the Groovy syntax based on GraalVM Truffle’s Espresso implementation

This is an optional implementation. You need to actively declare the following dependencies in the pom.xml of your own project. And please make sure your own projects are compiled with OpenJDK 21+ or its downstream distribution.

Due to the limitations of https://www.graalvm.org/jdk21/reference-manual/java-on-truffle/faq/#does-java-running-on-truffle-run-on-hotspot-too , this module is only ready on Linux when used in environments other than GraalVM Native Image.

<dependencies>
    <dependency>
        <groupId>org.apache.shardingsphere</groupId>
        <artifactId>shardingsphere-infra-expr-espresso</artifactId>
        <version>${shardingsphere.version}</version>
    </dependency>
    <dependency>
        <groupId>org.graalvm.polyglot</groupId>
        <artifactId>polyglot</artifactId>
        <version>23.1.2</version>
    </dependency>
    <dependency>
        <groupId>org.graalvm.polyglot</groupId>
        <artifactId>java-community</artifactId>
        <version>23.1.2</version>
        <type>pom</type>
    </dependency>
</dependencies>

ESPRESSO is still an experimental module that allows the use of Row Value Expressions with Groovy syntax under GraalVM Native Image through the Espresso implementation of GraalVM Truffle.

The syntax part is the same as the GROOVY implementation rules.

Type: ESPRESSO

Example:

  • <ESPRESSO>t_order_${1..3} will be converted to t_order_1, t_order_2, t_order_3
  • <ESPRESSO>${['online', 'offline']}_table${1..3} will be converted to online_table1, online_table2, online_table3, offline_table1, offline_table2, offline_table3

Procedure

When using attributes that require the use of Row Value Expressions, such as in the data sharding feature, it is sufficient to indicate the Type Name of the specific SPI implementation under the actualDataNodes attribute.

If the Row Value Expressions does not indicate the Type Name of the SPI, the SPI implementation of GROOVY will be used by default.

Sample

rules:
- !SHARDING
  tables:
    t_order: 
      actualDataNodes: <LITERAL>ds_0.t_order_0, ds_0.t_order_1, ds_1.t_order_0, ds_1.t_order_1
      tableStrategy: 
        standard:
          shardingColumn: order_id
          shardingAlgorithmName: t_order_inline
      keyGenerateStrategy:
        column: order_id
        keyGeneratorName: snowflake
  defaultDatabaseStrategy:
    standard:
      shardingColumn: user_id
      shardingAlgorithmName: database_inline
  shardingAlgorithms:
    database_inline:
      type: INLINE
      props:
        algorithm-expression: <GROOVY>ds_${user_id % 2}
    t_order_inline:
      type: INLINE
      props:
        algorithm-expression: t_order_${order_id % 2}
  keyGenerators:
    snowflake:
      type: SNOWFLAKE